Mercury-Mercruiser 8M0165589 NMEA 2000 CAN-P SmartCraft Gateway 1-4 Engines
This is a genuine Mercury Marine factory OEM part, not aftermarket
Please check our current stock level and order below. Use the Contact Us form at the bottom of the page for any questions
Mercury SmartCraft CAN-P to NMEA 2000 Gateway Kit - 8M0165589
The Mercury 8M0165589 SmartCraft Gateway allows compatible Mercury SmartCraft engine data to be shared with a standard NMEA 2000® network. This gateway makes engine information available to compatible third-party NMEA 2000 displays, gauges and multifunction displays (MFDs) that support Mercury engine data, such as Solix, Humminbird, etc.
Designed for single, twin, triple and quad engine installations, this genuine Mercury kit includes the multi-engine Gateway module, NMEA 2000 "T" connector, mounting hardware and installation instructions.
This Gateway is intended for installations where you want to place compatible Mercury SmartCraft engine data onto an existing NMEA 2000 network.
If your goal is to display engine information directly on a compatible chartplotter or multifunction display (MFD), you may want the Mercury SmartCraft Connect instead.
What Does This Gateway Do?
- Converts compatible Mercury SmartCraft engine data to the NMEA 2000 network.
- Allows compatible NMEA 2000 devices to receive Mercury engine information.
- Supports single through quad engine SmartCraft installations.
- Includes NMEA 2000 "T" connector for installation.
Typical Applications
- Adding Mercury engine data to an existing NMEA 2000 network.
- Sharing SmartCraft engine information with compatible marine electronics.
- Integrating SmartCraft engines into supported NMEA 2000 systems.
Important Installation Notes
- For multi-engine installations, all engines must be connected to the same SmartCraft CAN-P network.
- The Gateway must be connected to a 10-pin SmartCraft connection that receives a key-switch wake signal.
- The Gateway does not supply power to the NMEA 2000 backbone. Your NMEA 2000 network must have its own properly protected power source.
- This Gateway is not required when using MercMonitor, VesselView Link, VesselView 403, 502, 703 or 903, as those products already provide gateway functionality.
What's Included
- Gateway module
- NMEA 2000 "T" connector
- Mounting hardware
- Cable ties
- Installation instructions
Important Part Number Information
The number printed on the Gateway module itself may be an internal Mercury manufacturing or subassembly number and may not match the orderable Mercury service kit part number.
Always verify your purchase using the Mercury package label and your invoice.
Learn why Mercury part numbers sometimes don't match the numbers printed on the component.
Superseded Part Numbers
Mercury part number 8M0165589 supersedes:
- 98-8M0151748
- 8M0141101
- 84-8M0105243
- 84-8M0065208
- 84-8M0065207
Mercury SmartCraft CAN-P to NMEA 2000 Gateway Kit - 8M0165589
The Mercury 8M0165589 SmartCraft Gateway allows compatible Mercury SmartCraft engine data to be shared with a standard NMEA 2000® network. This gateway makes engine information available to compatible third-party NMEA 2000 displays, gauges and multifunction displays (MFDs) that support Mercury engine data, such as Solix, Humminbird, etc.
Designed for single, twin, triple and quad engine installations, this genuine Mercury kit includes the multi-engine Gateway module, NMEA 2000 "T" connector, mounting hardware and installation instructions.
This Gateway is intended for installations where you want to place compatible Mercury SmartCraft engine data onto an existing NMEA 2000 network.
If your goal is to display engine information directly on a compatible chartplotter or multifunction display (MFD), you may want the Mercury SmartCraft Connect instead.
What Does This Gateway Do?
- Converts compatible Mercury SmartCraft engine data to the NMEA 2000 network.
- Allows compatible NMEA 2000 devices to receive Mercury engine information.
- Supports single through quad engine SmartCraft installations.
- Includes NMEA 2000 "T" connector for installation.
Typical Applications
- Adding Mercury engine data to an existing NMEA 2000 network.
- Sharing SmartCraft engine information with compatible marine electronics.
- Integrating SmartCraft engines into supported NMEA 2000 systems.
Important Installation Notes
- For multi-engine installations, all engines must be connected to the same SmartCraft CAN-P network.
- The Gateway must be connected to a 10-pin SmartCraft connection that receives a key-switch wake signal.
- The Gateway does not supply power to the NMEA 2000 backbone. Your NMEA 2000 network must have its own properly protected power source.
- This Gateway is not required when using MercMonitor, VesselView Link, VesselView 403, 502, 703 or 903, as those products already provide gateway functionality.
What's Included
- Gateway module
- NMEA 2000 "T" connector
- Mounting hardware
- Cable ties
- Installation instructions
Important Part Number Information
The number printed on the Gateway module itself may be an internal Mercury manufacturing or subassembly number and may not match the orderable Mercury service kit part number.
Always verify your purchase using the Mercury package label and your invoice.
Learn why Mercury part numbers sometimes don't match the numbers printed on the component.
Superseded Part Numbers
Mercury part number 8M0165589 supersedes:
- 98-8M0151748
- 8M0141101
- 84-8M0105243
- 84-8M0065208
- 84-8M0065207
Customers who bought this item also bought
Mercury-Mercruiser 878492K14 Junction Box 4 Way
The newest part number is 8M0165557 -click here- to see the newest superseded part
Please note the new superseded part is a functional replacement and may look different from the original part
Mercury-Mercruiser 8M0110642 NMEA 2000 Starter Kit (Backbone)
Mercury-Mercruiser 25-805732 O-RING (2.612 x .103)
Mercury-Mercruiser 84-879982T20 10 Pin CAN Data Harness w Resistors Non DTS 20 Ft.
The newest part number is 8M0210758 -click here- to see the newest superseded part
Please note the new superseded part is a functional replacement and may look different from the original part
Mercury-Mercruiser 859318T1 TERMINATOR, 10 Pin (CAN 1 and 2)
The newest part number is 8M0210753 -click here- to see the newest superseded part
Please note the new superseded part is a functional replacement and may look different from the original part