Search
Filters
Close

Mercury-Mercruiser 8M0187355 350 MPI Horizon Inboard Down Angle Engine

8M0187355 Quicksilver 350 MPI Horizon Inline Engine Only
This is a genuine Quicksilver factory OEM part, not aftermarket.
Please check our current stock level and order below. Use the Contact Us form at the bottom of the page for any questions.
Stock status: Not in stock - will be transferred from factory
Manufacturer part number: 8M0187355
GTIN: 678633153679
Pickup or normally ships: Warehouse transfer - on 2nd-7th business day
Manufacturer: Mercury Marine
$20,968.75
$19,500.94
Product Shipping specifications = pounds and inches

8M0187355 Quicksilver Plus Series 350 MPI HORIZON INBOARD ‑ Down Angle Engine Only.

300 HP @ 4800 RPM. 350 Cubic Inch Motor Fully Dressed Marine Engine.
Engine Features 100% New Quicksilver: Cast Iron Engine Block, Closed Cooled Engine Block & Exhaust
Manifolds, Flush System, Special Flame Graphics, Multi‑Port Fuel Injection using Cool fuel II, Dry Joint Exhaust, Roller Camshaft, Quicksilver Cast Iron Cylinder Heads featuring Black‑X Valve Tech, 1.5:1 stamped steel rocker arms, ECM555, Engine Guardian, SmartCraft Ready, Mechanical Throttle and Shift, Premium
Dual‑Stage Driveplate, Inboard High‑Mount Starter, and 10‑Pin Harness. Runs on 87 Octane Fuel.

3 Year limited factory warranty!

NOTE: Dealer must change driveplate if used with in‑line transmissions.
NOTE: Because this is a completely new engine and not a major repower assembly, the old engine being replaced is to be returned per EPA 1068.240. 

Since the focus of PLUS‑SERIES ENGINES is repower, many parts included in new MerCruiser engines used for new boat construction are not included. Parts such as: transoms, trim pumps, Y‑Pipes, rigging, props, boat harnesses, riser kits, closed cooling kits, steering cylinders, lubes, and many other parts required for a successful repower must all be purchased separately.

Adapting Plus Series engines to specific applications may require some parts to be transferred from the engines coming out of the boat or purchased separately. Examples include:
• Transfer of flywheel housings, couplers, and other hardware to adapt to various makes of drives and transoms
• Changing engine couplers to match specific transmissions, or customer preferences 
• Changing engine mounts from front to side, or using solid engine mounts
• Use of various Quicksilver kits to meet cyour preferences or the specified installation requirements found in the Repower Reference Manual included with the engine

This 300 HP 100% New Quicksilver Inboard Engine Replaces all makes of Standard (LH) Rotation small block 5.7L & 6.2L inboard engines.

8M0187355 Quicksilver Plus Series 350 MPI HORIZON INBOARD ‑ Down Angle Engine Only.

300 HP @ 4800 RPM. 350 Cubic Inch Motor Fully Dressed Marine Engine.
Engine Features 100% New Quicksilver: Cast Iron Engine Block, Closed Cooled Engine Block & Exhaust
Manifolds, Flush System, Special Flame Graphics, Multi‑Port Fuel Injection using Cool fuel II, Dry Joint Exhaust, Roller Camshaft, Quicksilver Cast Iron Cylinder Heads featuring Black‑X Valve Tech, 1.5:1 stamped steel rocker arms, ECM555, Engine Guardian, SmartCraft Ready, Mechanical Throttle and Shift, Premium
Dual‑Stage Driveplate, Inboard High‑Mount Starter, and 10‑Pin Harness. Runs on 87 Octane Fuel.

3 Year limited factory warranty!

NOTE: Dealer must change driveplate if used with in‑line transmissions.
NOTE: Because this is a completely new engine and not a major repower assembly, the old engine being replaced is to be returned per EPA 1068.240. 

Since the focus of PLUS‑SERIES ENGINES is repower, many parts included in new MerCruiser engines used for new boat construction are not included. Parts such as: transoms, trim pumps, Y‑Pipes, rigging, props, boat harnesses, riser kits, closed cooling kits, steering cylinders, lubes, and many other parts required for a successful repower must all be purchased separately.

Adapting Plus Series engines to specific applications may require some parts to be transferred from the engines coming out of the boat or purchased separately. Examples include:
• Transfer of flywheel housings, couplers, and other hardware to adapt to various makes of drives and transoms
• Changing engine couplers to match specific transmissions, or customer preferences 
• Changing engine mounts from front to side, or using solid engine mounts
• Use of various Quicksilver kits to meet cyour preferences or the specified installation requirements found in the Repower Reference Manual included with the engine

This 300 HP 100% New Quicksilver Inboard Engine Replaces all makes of Standard (LH) Rotation small block 5.7L & 6.2L inboard engines.

*
*
*
*