Search
Filters
Close

Mercury-Mercruiser 865108R10 Reman 383 MAG Stroker Inboard Engine

Mercury Marine part number 865108R10 is no longer made and is not available
Manufacturer part number: 865108R10
GTIN: 745061784895
Manufacturer: Mercury Marine
$0.00
Product Shipping specifications = pounds and inches

Mercury Remanufacturing 383 Mag Stroker Inboard ‑ Down Angle, Plus Series, Engine Only.

350 HP @ 5000 RPM. 383 Cubic Inch Motor Fully Dressed Marine Engine.

Engine Features: Special Flame Graphics, Multi‑Port Fuel Injection using Gen 3 Cool Fuel, Dry Joint Exhaust, 100 PSI Oil Pump, 4340 Forged Steel Crankshaft, High‑Lift Billet Steel Camshaft, Vortec Cast Iron Cylinder Heads, Stainless Steel Valves, 9.0:1 Hypereutectic Pistons, 1.6:1 Roller Rocker Arms, Raw Water Cooling, ECM555, Engine Guardian, SmartCraft Ready, Mechanical Throttle and Shift, Premium Dual‑Stage Driveplate, Inboard High‑Mount Starter, and 14‑Pin Harness.

Adapting Plus Series engines to specific applications may require some parts to be transferred from the engines coming out of the boat or purchased separately. Examples include:
• Transfer of flywheel housings, couplers, and other hardware to adapt to various makes of drives and transoms
• Changing engine couplers to match specific transmissions, or your preferences
• Changing engine mounts from front to side, or using solid engine mounts
• Use of various kits to meet your preferences or the specified installation requirements found in the Repower Reference Manual included with the engine.

Runs on 87 Octane fuel. 1 Year limited factory warranty. 
NOTE: Dealer must change driveplate if used with in‑line transmissions.

350 HP Remanufactured inboard engine replaces all makes of Standard (LH) Rotation 5.7L, 6.2L, & 7.4L inboard engines.

Mercury Remanufacturing 383 Mag Stroker Inboard ‑ Down Angle, Plus Series, Engine Only.

350 HP @ 5000 RPM. 383 Cubic Inch Motor Fully Dressed Marine Engine.

Engine Features: Special Flame Graphics, Multi‑Port Fuel Injection using Gen 3 Cool Fuel, Dry Joint Exhaust, 100 PSI Oil Pump, 4340 Forged Steel Crankshaft, High‑Lift Billet Steel Camshaft, Vortec Cast Iron Cylinder Heads, Stainless Steel Valves, 9.0:1 Hypereutectic Pistons, 1.6:1 Roller Rocker Arms, Raw Water Cooling, ECM555, Engine Guardian, SmartCraft Ready, Mechanical Throttle and Shift, Premium Dual‑Stage Driveplate, Inboard High‑Mount Starter, and 14‑Pin Harness.

Adapting Plus Series engines to specific applications may require some parts to be transferred from the engines coming out of the boat or purchased separately. Examples include:
• Transfer of flywheel housings, couplers, and other hardware to adapt to various makes of drives and transoms
• Changing engine couplers to match specific transmissions, or your preferences
• Changing engine mounts from front to side, or using solid engine mounts
• Use of various kits to meet your preferences or the specified installation requirements found in the Repower Reference Manual included with the engine.

Runs on 87 Octane fuel. 1 Year limited factory warranty. 
NOTE: Dealer must change driveplate if used with in‑line transmissions.

350 HP Remanufactured inboard engine replaces all makes of Standard (LH) Rotation 5.7L, 6.2L, & 7.4L inboard engines.

*
*
*
*