Search
Filters
Close

Mercury-Mercruiser 8M0178537 Side Mount Control w Trim 20 Ft, 14 Pin

8M0178537 Side Mount Remote Control w Trim RH
This is a genuine Mercury Marine factory OEM part, not aftermarket
Please check our current stock level and order below. Use the Contact Us form at the bottom of the page for any questions
Stock status: 12 PIECES ARE IN STOCK
Manufacturer part number: 8M0178537
GTIN: 745061684294
Pickup or normally ships: Available - Next business day
Manufacturer: Mercury Marine
$575.15
$534.88
Product Shipping specifications = pounds and inches

8M0178537 14 Pin Side Mount Control Electric Start w 20 Ft. Harness
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Has a handle mounted power trim switch and a 20 ft. (6.1 m) harness with 14 pin Deutshe connector and will direct connect to the engine models below without the use of an adapter harness.

See Throttle/shift cables Gen I Part # 897977A__. Throttle/Shift cables (896143A) for MY2005 and newer 8/9.9 FourStroke outboards.

8‑9.9 4 Stroke engines generation change above S/N OR192772 and new 15/20 4 Stroke engines will use Gen I series Throttle/Shift Cables

2006 ‑ 25‑ 300 HP 4 Stroke Any engine that has the 14 pin connector from the primary harness.

Gen I cables are required with this control. See our throttle/shift cable page here.

Superseded from part # 881170A14

8M0178537 14 Pin Side Mount Control Electric Start w 20 Ft. Harness
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Has a handle mounted power trim switch and a 20 ft. (6.1 m) harness with 14 pin Deutshe connector and will direct connect to the engine models below without the use of an adapter harness.

See Throttle/shift cables Gen I Part # 897977A__. Throttle/Shift cables (896143A) for MY2005 and newer 8/9.9 FourStroke outboards.

8‑9.9 4 Stroke engines generation change above S/N OR192772 and new 15/20 4 Stroke engines will use Gen I series Throttle/Shift Cables

2006 ‑ 25‑ 300 HP 4 Stroke Any engine that has the 14 pin connector from the primary harness.

Gen I cables are required with this control. See our throttle/shift cable page here.

Superseded from part # 881170A14

*
*
*
*