Mercury Outboard 8M0178536 Side Mount Control Port or Stbd 15 Ft. 14 Pin
This is a genuine Mercury Marine factory OEM part, not aftermarket
Please check our current stock level and order below. Use the Contact Us form at the bottom of the page for any questions
8M0178536MSC 4000 14 Pin Electric Start Remote Control Side Mount w 15 Ft. Harness
WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov
This control has a handle mounted power trim switch and a 15 ft. (4.58 m) harness with 14 pinDeutshe connector and will direct connect to the engine models below without theuse of an adapter harness.This control is not for use withengines that have counter-rotating lower units.
Reference Throttle/shift cable Gen I - 897977A__. Throttle/Shift cables (896143A) forModel Year 2005 and newer 8/9.9 FourStroke outboards.
8-9.9 HP 4 Stroke enginesgeneration change above Serial # OR192772 and newer 15/20 HP 4 Stroke engines will useGen I series throttle/shift cables.
2006 25-300 HP 4 Stroke - Any engine that has the 14 pin connector from theprimary harness.
Gen I cables are required with this control.See our throttle/shift cable page here.
Handle can be mounted on port or starboard side of control box.
Superseded from881170A13
8M0178536MSC 4000 14 Pin Electric Start Remote Control Side Mount w 15 Ft. Harness
WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov
This control has a handle mounted power trim switch and a 15 ft. (4.58 m) harness with 14 pinDeutshe connector and will direct connect to the engine models below without theuse of an adapter harness.This control is not for use withengines that have counter-rotating lower units.
Reference Throttle/shift cable Gen I - 897977A__. Throttle/Shift cables (896143A) forModel Year 2005 and newer 8/9.9 FourStroke outboards.
8-9.9 HP 4 Stroke enginesgeneration change above Serial # OR192772 and newer 15/20 HP 4 Stroke engines will useGen I series throttle/shift cables.
2006 25-300 HP 4 Stroke - Any engine that has the 14 pin connector from theprimary harness.
Gen I cables are required with this control.See our throttle/shift cable page here.
Handle can be mounted on port or starboard side of control box.
Superseded from881170A13