Categories
Recently viewed products
Popular tags
View all

Mercury-Outboard 8M0178526 Side Mount Control No Power Trim 15', 8 Pin

Mercury-Outboard 8M0178526 Side Mount Remote Control Non Power Trim Bar codes for Mercury Marine part number 8M0178526
8M0178526 Side Mount Control Non Power Trim
This is a genuine Mercury Marine factory OEM part, not aftermarket
Please check our current stock level and order below. Use the Contact Us form at the bottom of the page for any questions
Availability: 1 in stock
Manufacturer part number: 8M0178526
GTIN: 745061518339
Normally Ships: In stock - Today (except for Holidays)
Manufacturer: Mercury Marine
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Shipping specs, pounds and inches
MSRP: $552.14
$507.50

MSC 4000 Side Mount Electric Non-Power Trim Control

Superseded from part # 881170A3
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

This control features a non-power trim handle, 15 ft.(4.58 m) harness and built-inwarning horn.

Fits all current Mercury/Mariner Outboards 6 HP and above (without power trim)and 1993 and newer Force Outboards 40 HP and higher utilizing Mercury stylecables (with power trim). Can be mounted starboard or port side and is stackable. Offers"push to choke" ignition switch, 8 pin connector wiring harness, lanyard
stop switch, separate neutral warm-up lever.

For MY2005 and newer 8/9.9 FourStroke Outboards SAE Throttle/Shift cables must be used.

For 8/9.9 FourStroke engines generation change above Serial # OR192772 and 15/20FourStroke engines will use GEN I cables.

When used with a MY2005 and newer 8/9.9, 15/20 FourStroke Outboard anAdapter harness is required.
GEN I cables must be used on other engines

Visit our throttle/shift cable page here

**NOT for use withengines that have counter rotating lower units. Older engines mayrequire an adapter harness.

MSC 4000 Side Mount Electric Non-Power Trim Control

Superseded from part # 881170A3
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

This control features a non-power trim handle, 15 ft.(4.58 m) harness and built-inwarning horn.

Fits all current Mercury/Mariner Outboards 6 HP and above (without power trim)and 1993 and newer Force Outboards 40 HP and higher utilizing Mercury stylecables (with power trim). Can be mounted starboard or port side and is stackable. Offers"push to choke" ignition switch, 8 pin connector wiring harness, lanyard
stop switch, separate neutral warm-up lever.

For MY2005 and newer 8/9.9 FourStroke Outboards SAE Throttle/Shift cables must be used.

For 8/9.9 FourStroke engines generation change above Serial # OR192772 and 15/20FourStroke engines will use GEN I cables.

When used with a MY2005 and newer 8/9.9, 15/20 FourStroke Outboard anAdapter harness is required.
GEN I cables must be used on other engines

Visit our throttle/shift cable page here

**NOT for use withengines that have counter rotating lower units. Older engines mayrequire an adapter harness.