Mercury-Mercruiser 8M0178534 Side Mount Control w Trim 20 Ft., 10 Pin

8M0178534 Side Mount Control with Power Trim 20 Ft., 10 Pin
This is a genuine Mercury Marine factory OEM part, not aftermarket
Please check our current stock level and order below. Use the Contact Us form at the bottom of the page for any questions
Availability: Not in stock - will be transferred from factory
Manufacturer part number: 8M0178534
GTIN: 745061612716
Normally Ships: Warehouse transfer - on 4th business day
Manufacturer: Mercury Marine
Shipping specs, pounds and inches
MSRP: $579.44
$534.00

8M0178534 Electric Side Mount Remote Control with Power Trim
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

This control features a handle mounted power trim switch, 20 ft. (6.1 m) harness with Amp 10‑pin connector. The control will connect to the engine models below without the use of an adapter harness.

Used on MY2005 and newer, 8/9.9 HP, 15/20 HP FourStroke engines with electric start and power trim.

For 8/9.9 HP FourStroke engines generation change above Serial number OR192772 and 15/20 HP FourStroke engines, use GEN I cables.

GEN I cables must be used on other engines.

Superseded from part # 881170A11

8M0178534 Electric Side Mount Remote Control with Power Trim
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

This control features a handle mounted power trim switch, 20 ft. (6.1 m) harness with Amp 10‑pin connector. The control will connect to the engine models below without the use of an adapter harness.

Used on MY2005 and newer, 8/9.9 HP, 15/20 HP FourStroke engines with electric start and power trim.

For 8/9.9 HP FourStroke engines generation change above Serial number OR192772 and 15/20 HP FourStroke engines, use GEN I cables.

GEN I cables must be used on other engines.

Superseded from part # 881170A11

*
*
*
*