8M0176287 MSC 4000 SIDE MOUNT REMOTE CONTROL-14 PIN 15 FT.
This control features a handle mounted power trim switch and a 15 ft. (4.58 m) harness with 14 pin Deutsch connector.
This mechanical side mount control provides a smooth shift/load feel and an improved aesthetics. The control utilizes a 14 pin connector wiring harness and lanyard stop switch. The power trim models incorporate a single rocker type trim/trailer switch in the handle. This control is not for use with engines that have counter rotating lower units. Older engines may require a harness adapter.
This side mount control will connect to the engine models below without the use of an adapter harness.
For 2006 and newer non-DTS 25‑300 HP Outboard engines.
CAN P 2 pin connection for SmartCraft added. Must purchase additional 2 pin resistor 893388A01
This control requires the use of Mercury/Quicksilver GEN II throttle and shift cables.
SUPERSEDED FROM 8M0138640
8M0176287 MSC 4000 SIDE MOUNT REMOTE CONTROL-14 PIN 15 FT.
This control features a handle mounted power trim switch and a 15 ft. (4.58 m) harness with 14 pin Deutsch connector.
This mechanical side mount control provides a smooth shift/load feel and an improved aesthetics. The control utilizes a 14 pin connector wiring harness and lanyard stop switch. The power trim models incorporate a single rocker type trim/trailer switch in the handle. This control is not for use with engines that have counter rotating lower units. Older engines may require a harness adapter.
This side mount control will connect to the engine models below without the use of an adapter harness.
For 2006 and newer non-DTS 25‑300 HP Outboard engines.
CAN P 2 pin connection for SmartCraft added. Must purchase additional 2 pin resistor 893388A01
This control requires the use of Mercury/Quicksilver GEN II throttle and shift cables.
SUPERSEDED FROM 8M0138640