Menu
Search
Filters
Close

Gen 1 / SAE Premium Throttle / Shift Cable - Outboard

SAE Platinum Plus Generation 1 (I) Throttle and Shift Cables. Available lengths are 5 feet - 30 feet. Choose length below.
Stock status: Sorry not in stock, cannot order at this time
Manufacturer part number: 8M0052502 to 8M0085964
*
$54.74
$28.79
Product Shipping specifications = pounds and inches
Mercury's Platinum Plus Throttle and Shift cables are built for a long life and are designed for maximum performance in all weather conditions – even down to 0 degrees Fahrenheit.
These throttle and shift cables have a stainless steel core with 16 Lay ‑ flexible core wire.
 
Layered Technology Featuring ‑
‑ Tough polypropylene outer jacket is UV and abrasion resistant
‑ 22 oil‑tempered wires for increased compression strength and durability
‑ Lubricated core liner to stand up to the harsh marine environment while remaining flexible
‑ Patented hexagonal shape allows for minimal contact with the liner
‑ Stainless steel core is specially designed to handle tough compression loads, but flexible for severe applications
 
Control end is a traditional Gen I connection and the engine end is a standard SAE threaded end.
 
Must be used with a GEN I remote control.
Fits Mercury/Mariner 4/5 HP Model Year 1987 and newer, 4/5/6 HP FourStroke Model Year 1999 and newer, 8/9.9 HP FourStroke Model Year 2005 and newer and Mariner 8 thru 60 HP outboards of Japanese origin.
 
Available lengths 5 Ft - 30 Ft
Mercury's Platinum Plus Throttle and Shift cables are built for a long life and are designed for maximum performance in all weather conditions – even down to 0 degrees Fahrenheit.
These throttle and shift cables have a stainless steel core with 16 Lay ‑ flexible core wire.
 
Layered Technology Featuring ‑
‑ Tough polypropylene outer jacket is UV and abrasion resistant
‑ 22 oil‑tempered wires for increased compression strength and durability
‑ Lubricated core liner to stand up to the harsh marine environment while remaining flexible
‑ Patented hexagonal shape allows for minimal contact with the liner
‑ Stainless steel core is specially designed to handle tough compression loads, but flexible for severe applications
 
Control end is a traditional Gen I connection and the engine end is a standard SAE threaded end.
 
Must be used with a GEN I remote control.
Fits Mercury/Mariner 4/5 HP Model Year 1987 and newer, 4/5/6 HP FourStroke Model Year 1999 and newer, 8/9.9 HP FourStroke Model Year 2005 and newer and Mariner 8 thru 60 HP outboards of Japanese origin.
 
Available lengths 5 Ft - 30 Ft
*
*
*
*
Categories
Popular tags
View all
Information
Customer service
Copyright © 2024 Bam Marine of Florida Inc. All rights reserved.