Mercury-Mercruiser 883710A03 Panel Mount Mechanical Control RH or LH Chrome w Trim

883710A03 Panel Mount Control Gen II Control w Lock Bar for Neutral Release Chrome
This is a genuine Mercury Marine factory OEM part, not aftermarket
Please check our current stock level and order below. Use the Contact Us form at the bottom of the page for any questions
Manufacturer part number: 883710A03
GTIN: 745061577121
Manufacturer: Mercury Marine
Availability: 9 in stock
Normally Ships: In stock - Today (except for Holidays)
Shipping specs, pounds and inches
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
MSRP: $553.89
$488.23

883710A03 Gen II Mechanical Panel Mount Control Port or Starboard - Chrome w Trim

Fits all current Mercruiser Sterndrive engines and Mercury/Mariner 3.4L outboards with external trim cylinders.

The Panel Mount control features a chrome handle and comes with a 4 ft. (1.22 m) trim and trailer switch harness with the 4 pin molex connector.

All installations require a separate Ignition switch assembly and Throttle/Shift cables to complete the installation. The neutral safety switch leads are 6.5 ft. (1.98 m) and have a bullet connector on the ends. The lanyard switch leads also have bullet style connector ends.

Must use Gen II Throttle/Shift cables, part number range 897978A__(choose your length)

The power trim extension harness also needs to be ordered separately:
84-817659T01 & 84-881125A1 = 4 pin Molex to traditional Mercury 3 blade power trim connector

84-865772T01 & 84-865772T02 = 4 pin Molex to the Packard 3 pin power trim connector.

Replacement for MPC 4000 With Trim Panel Mount part numbers 827270A43, 827270A47 and 827270A49.

883710A03 Gen II Mechanical Panel Mount Control Port or Starboard - Chrome w Trim

Fits all current Mercruiser Sterndrive engines and Mercury/Mariner 3.4L outboards with external trim cylinders.

The Panel Mount control features a chrome handle and comes with a 4 ft. (1.22 m) trim and trailer switch harness with the 4 pin molex connector.

All installations require a separate Ignition switch assembly and Throttle/Shift cables to complete the installation. The neutral safety switch leads are 6.5 ft. (1.98 m) and have a bullet connector on the ends. The lanyard switch leads also have bullet style connector ends.

Must use Gen II Throttle/Shift cables, part number range 897978A__(choose your length)

The power trim extension harness also needs to be ordered separately:
84-817659T01 & 84-881125A1 = 4 pin Molex to traditional Mercury 3 blade power trim connector

84-865772T01 & 84-865772T02 = 4 pin Molex to the Packard 3 pin power trim connector.

Replacement for MPC 4000 With Trim Panel Mount part numbers 827270A43, 827270A47 and 827270A49.

Customers who bought this item also bought