Mercury-Mercruiser 48-889973L65 Maximus LT 15.63 X 34 P LH Lab Finished Propeller

48-889973L65 Lab Finished 15.63 X 34 P Maximus Long Tube 5 Blade LH Prop
This is a genuine Mercury Marine factory OEM part, not aftermarket
Please check our current stock level and order below or use the Contact Us form at the bottom of the page for any questions
Availability: 1 in stock
Manufacturer part number: 889973L65
GTIN: 745061647848
Normally Ships: Available - Next business day
Manufacturer: Mercury Marine
Shipping specs, pounds and inches
MSRP: $2,990.00
$1,200.00

MAXIMUS LONG TUBE LAB FINISHED PROPELLER 34 PITCH, LEFTHAND (COUNTER ROTATION)

Lab Finished by BBlades

Lab Finished Maximus propellers are designed to reduce propeller slip with high‑performance, high gearcase drive height sterndrive applications. Excellent top speeds, great handling, good mid‑range speeds and eye popping planing performance for Deep Vee, Deep Step Vee and Deck boats.

Works with 300‑600 HP engines. Barrel length is 8.5 inches, adds stern lift.

Lab finishing adds 300 RPM. Because of the 300 RPM gain consideration should be given to increase 2 inches of pitch over a stock Maximus. 

If moving from the Bravo I Lab Finished propeller to the Lab Finished Maximus, generally move 2 inches of pitch down and to the 15.25 inch diameter. Example, if moving from 15.25 inch x 32 Lab Finished Bravo I, use the 15.25 inch x 30 Lab Finished Maximus.

Includes HD Hub kit 840389K06 for 1.25 inch prop shaft.

If using with 1 inch prop shaft use hub kit 835258K2.

If using full 15.625 inch diameter with the XR Sport Master Shorty the anti‑cavitation plate must be removed.

MAXIMUS LONG TUBE LAB FINISHED PROPELLER 34 PITCH, LEFTHAND (COUNTER ROTATION)

Lab Finished by BBlades

Lab Finished Maximus propellers are designed to reduce propeller slip with high‑performance, high gearcase drive height sterndrive applications. Excellent top speeds, great handling, good mid‑range speeds and eye popping planing performance for Deep Vee, Deep Step Vee and Deck boats.

Works with 300‑600 HP engines. Barrel length is 8.5 inches, adds stern lift.

Lab finishing adds 300 RPM. Because of the 300 RPM gain consideration should be given to increase 2 inches of pitch over a stock Maximus. 

If moving from the Bravo I Lab Finished propeller to the Lab Finished Maximus, generally move 2 inches of pitch down and to the 15.25 inch diameter. Example, if moving from 15.25 inch x 32 Lab Finished Bravo I, use the 15.25 inch x 30 Lab Finished Maximus.

Includes HD Hub kit 840389K06 for 1.25 inch prop shaft.

If using with 1 inch prop shaft use hub kit 835258K2.

If using full 15.625 inch diameter with the XR Sport Master Shorty the anti‑cavitation plate must be removed.

*
*
*
*