Mercury-Mercruiser 48-889972L65 Maximus Long Tube 34 RH Lab Finished Propeller

48-889972L65 Lab Finished 15.63 X 34 P Maximus 5 Blade RH Prop
This is a genuine Mercury Marine factory OEM part, not aftermarket
Please check our current stock level and order below or use the Contact Us form at the bottom of the page for any questions
Availability: Not in stock - will be transferred from factory
Manufacturer part number: 889972L65
GTIN: 745061647787
Normally Ships: Warehouse transfer - on 4th business day
Manufacturer: Mercury Marine
Shipping specs, pounds and inches
MSRP: $2,990.00
$2,727.45

MAXIMUS LONG TUBE LAB FINISHED PROPELLER 34 PITCH, RIGHTHAND (STANDARD ROTATION)

Mercury Racing Lab Finished Maximus propellers are designed to reduce propeller slip with high‑performance, high gearcase drive height sterndrive applications. Excellent top speeds, great handling, good mid‑range speeds and eye popping planing performance for Deep Vee, Deep Step Vee and Deck boats.

Lab finishing adds 300 RPM. Because of the 300 RPM gain consideration should be given to increase 2 inches of pitch over a stock Maximus. 

If moving from the Bravo I Lab Finished propeller to the Lab Finished Maximus, generally move 2 inches of pitch down and to the 15.25 inch diameter. Example, if moving from 15.25 inch x 32 Lab Finished Bravo I, use the 15.25 inch x 30 Lab Finished Maximus.

Barrel length is 8.5 inches, adds stern lift. Works with 300‑600 HP engines.

Hub kits are sold seperately.  For 1.25 inch prop shaft use 8M0183487 HD Solid Hub kit. If using with 1 inch prop shaft use hub kit 835258K2.

If using full 15.625 inch diameter with the XR Sport Master Shorty the anti‑cavitation plate must be removed.

MAXIMUS LONG TUBE LAB FINISHED PROPELLER 34 PITCH, RIGHTHAND (STANDARD ROTATION)

Mercury Racing Lab Finished Maximus propellers are designed to reduce propeller slip with high‑performance, high gearcase drive height sterndrive applications. Excellent top speeds, great handling, good mid‑range speeds and eye popping planing performance for Deep Vee, Deep Step Vee and Deck boats.

Lab finishing adds 300 RPM. Because of the 300 RPM gain consideration should be given to increase 2 inches of pitch over a stock Maximus. 

If moving from the Bravo I Lab Finished propeller to the Lab Finished Maximus, generally move 2 inches of pitch down and to the 15.25 inch diameter. Example, if moving from 15.25 inch x 32 Lab Finished Bravo I, use the 15.25 inch x 30 Lab Finished Maximus.

Barrel length is 8.5 inches, adds stern lift. Works with 300‑600 HP engines.

Hub kits are sold seperately.  For 1.25 inch prop shaft use 8M0183487 HD Solid Hub kit. If using with 1 inch prop shaft use hub kit 835258K2.

If using full 15.625 inch diameter with the XR Sport Master Shorty the anti‑cavitation plate must be removed.

*
*
*
*