Mercury-Mercruiser 8M0225727 383 MAG Stroker Inboard Reman Engine

8M0225727 383 MAG Stroker Inboard Engine
This is a genuine Mercury Marine factory remanufactured OEM engine, not aftermarket
Please check our current stock level and order below. Use the Contact Us form at the bottom of the page for any questions.
Availability: 1 in stock
Manufacturer part number: 8M0225727
Normally Ships: Warehouse transfer - on 2nd business day
Manufacturer: Mercury Marine
Shipping specs, pounds and inches
MSRP: $15,918.75
$14,804.44

8M0225727 Mercury Remanufacturing 383 MAG MPI Stroker Inboard Engine

Perfect repower option for 350 MAG, 7.4L and 7.4L MPI inboard engines. This 350 HP inboard comes with dry joint exhaust. Closed cooling kit available.

Power350 HP (261 kW)
Full Throttle Range4600-5000 RPM
Displacement383 CID (6.3L)
Engine TypeRemanufactured GM V8 Marine Iron Block & Gen+ Heads
Bore & Stroke4.030” x 3.750” (102mm x 95mm)
Compression Ratio9.0:1 with Hypereutectic Pistons
Rocker Arm Ratio1.6:1 Full Roller
Fuel Requirement87 Octane (R+M)/2
Fuel SystemMPI with Gen 3 Cool Fuel
Induction System2-piece Long Runner Intake with 75mm Throttle Body
Control SystemECM 555 with SmartCraft CAN Capability
Ignition SystemCrank-fired High Voltage Switch w/Knock Control Platinum Plugs
Charging System65 Amp / 917 Watt Alternator
Water Drain SystemMulti-Point Drain – Hand Removable Blue Drain Plugs
Exhaust SystemIron Manifold with Dry-Joint Exhaust Elbow
Cooling SystemThermostatically Controlled Raw Water - 160 F
Accessory Drive SystemSerpentine Belt
Lubrication SystemHigh Flow Oil Pump
Recommended Engine OilSAE 25-40 NMMA Certified FC-W Synthetic Blend
AudioWarning SystemOil Pressure, Coolant Temperature, Drive Lube, Water Pressure
Compatible TransmissionsZF 68A, ZF 68 IV, ZF 68C, VD 72C, VD 5000A, VD 5000V
Dimensions
(LxWxH)
32” x 30” x 22” (814mm x 740mm x 559mm)
Engine Weight (lbs./kg)932 / 423
Optional Cooling Fresh WaterDealer Installed Kit
Boat Harness Type14-pin



8M0225727 Mercury Remanufacturing 383 MAG MPI Stroker Inboard Engine

Perfect repower option for 350 MAG, 7.4L and 7.4L MPI inboard engines. This 350 HP inboard comes with dry joint exhaust. Closed cooling kit available.

Power350 HP (261 kW)
Full Throttle Range4600-5000 RPM
Displacement383 CID (6.3L)
Engine TypeRemanufactured GM V8 Marine Iron Block & Gen+ Heads
Bore & Stroke4.030” x 3.750” (102mm x 95mm)
Compression Ratio9.0:1 with Hypereutectic Pistons
Rocker Arm Ratio1.6:1 Full Roller
Fuel Requirement87 Octane (R+M)/2
Fuel SystemMPI with Gen 3 Cool Fuel
Induction System2-piece Long Runner Intake with 75mm Throttle Body
Control SystemECM 555 with SmartCraft CAN Capability
Ignition SystemCrank-fired High Voltage Switch w/Knock Control Platinum Plugs
Charging System65 Amp / 917 Watt Alternator
Water Drain SystemMulti-Point Drain – Hand Removable Blue Drain Plugs
Exhaust SystemIron Manifold with Dry-Joint Exhaust Elbow
Cooling SystemThermostatically Controlled Raw Water - 160 F
Accessory Drive SystemSerpentine Belt
Lubrication SystemHigh Flow Oil Pump
Recommended Engine OilSAE 25-40 NMMA Certified FC-W Synthetic Blend
AudioWarning SystemOil Pressure, Coolant Temperature, Drive Lube, Water Pressure
Compatible TransmissionsZF 68A, ZF 68 IV, ZF 68C, VD 72C, VD 5000A, VD 5000V
Dimensions
(LxWxH)
32” x 30” x 22” (814mm x 740mm x 559mm)
Engine Weight (lbs./kg)932 / 423
Optional Cooling Fresh WaterDealer Installed Kit
Boat Harness Type14-pin



*
*
*
*