Mercury-Mercruiser 8M0178531 REMOTE CONTROL

We are closed toady , Friday July 3rd for Independence Day and will process your order on July 6th when we re-open!

Parts showing “Not in stock - transfer from factory” normally ship in 2–3 business days.

Questions? Please use our Contact Us page.

Mercury-Mercruiser 8M0178531 REMOTE CONTROL
is no longer made and is no longer available
Manufacturer part number: 8M0178531
GTIN: 745061518377
Manufacturer: Mercury Marine
Shipping specs, pounds and inches
$0.00

Superseded from 881170A7

Side Mount Remote Control
WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

This control features a non - power trim handle with a 15 ft.(4.58 m) harness. Thiscontrol does not have a warning horn.

Fits Mariner 30 to 55 HP (Japanese origin) except 30/40 HP (2 cyl.) with integral oilinjection.

This control can be mounted starboard or port side and is stackable.
This control offers "push to choke" ignition switch, 8 pin connector wiring harness, lanyard stop switch, separate neutral warm-up lever and requires Gen I throttle and shift cables. Has a 5 pin
accessory plug for tachometer and an adjustable throttle friction. This control is not for use with engines that have counter rotating lower units.
Older engines may require an adapter harness.

GEN I cables must be used

Superseded from 881170A7

Side Mount Remote Control
WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov

This control features a non - power trim handle with a 15 ft.(4.58 m) harness. Thiscontrol does not have a warning horn.

Fits Mariner 30 to 55 HP (Japanese origin) except 30/40 HP (2 cyl.) with integral oilinjection.

This control can be mounted starboard or port side and is stackable.
This control offers "push to choke" ignition switch, 8 pin connector wiring harness, lanyard stop switch, separate neutral warm-up lever and requires Gen I throttle and shift cables. Has a 5 pin
accessory plug for tachometer and an adjustable throttle friction. This control is not for use with engines that have counter rotating lower units.
Older engines may require an adapter harness.

GEN I cables must be used