Mercury-Mercruiser 865108R89 4.3L ALPHA 4V-RM
Is no longer available
Factory Remanufactured 225 HP Sterndrive Engine.
Replaces MerCruiser 4.3L & 5.0L sterndrive engines.Core/Container deposit required (add to cart to see amount).
PLUS-SERIES engines from Mercury Remanufacturing come with a One-Year Factory Limited Warranty. Mercury Product Protection is available toprovide up to two-years of additional coverage.
Specs:Dressed Marine Engine. Engine Features: Special Flame Graphics, New 600 cfm4bbl Carburetor, Electric Fuel Pump, 2-piece Wet Joint Exhaust, Nodular IronCrankshaft, Billet Steel Roller Camshaft, Vortec Cast Iron Cylinder Heads,Stainless Steel Valves, 9.4:1 Hypereutectic Pistons, 1.5:1 Full Roller Rocker Arms,Thunderbolt V Ignition with Knock Control, 10-Pin Harness. Runs on 87 OctaneFuel.
CONSIDERATIONS FOR THE 4.3L, 5.7L and 350 Gen+ PARTIALLY DRESSED ENGINES:
To avoid the expense of a fully-dressed complete engine, the following items (if in good condition) need to be transferred from the original engineover to the replacement engine: exhaust manifolds, risers, starter motor, alternator, pulleys hoses and belts.
Installing a partially dressed engine into a 1981 or earlier application would not be recommended. Due to the shift bracket that contains a reverselock mechanism, it would be extremely difficult and expensive to accomplish this upgrade.
Factory Remanufactured 225 HP Sterndrive Engine.
Replaces MerCruiser 4.3L & 5.0L sterndrive engines.Core/Container deposit required (add to cart to see amount).
PLUS-SERIES engines from Mercury Remanufacturing come with a One-Year Factory Limited Warranty. Mercury Product Protection is available toprovide up to two-years of additional coverage.
Specs:Dressed Marine Engine. Engine Features: Special Flame Graphics, New 600 cfm4bbl Carburetor, Electric Fuel Pump, 2-piece Wet Joint Exhaust, Nodular IronCrankshaft, Billet Steel Roller Camshaft, Vortec Cast Iron Cylinder Heads,Stainless Steel Valves, 9.4:1 Hypereutectic Pistons, 1.5:1 Full Roller Rocker Arms,Thunderbolt V Ignition with Knock Control, 10-Pin Harness. Runs on 87 OctaneFuel.
CONSIDERATIONS FOR THE 4.3L, 5.7L and 350 Gen+ PARTIALLY DRESSED ENGINES:
To avoid the expense of a fully-dressed complete engine, the following items (if in good condition) need to be transferred from the original engineover to the replacement engine: exhaust manifolds, risers, starter motor, alternator, pulleys hoses and belts.
Installing a partially dressed engine into a 1981 or earlier application would not be recommended. Due to the shift bracket that contains a reverselock mechanism, it would be extremely difficult and expensive to accomplish this upgrade.