Menu
Search
Filters
Close

Mercury Outboard 883710A01 Gen II Mechanical Control (Non Trim) Port or Stbd

Mercury-Mercruiser 883710A01 Outboard Mechanical Remote Control (Non Trim) Picture of Mercury Outboard 883710A01 Gen II Mechanical Control (Non Trim) Port or Stbd Bar codes for Mercury Marine part number 883710A01
883710A01 Outboard Remote Control Non Trim, Panel Mount Lock Bar
This is a genuine Mercury Marine factory OEM part, not aftermarket
Please check our current stock level and order below or use the Contact Us form at the bottom of the page for any questions
Stock status: Not in stock - will be transferred from factory
Manufacturer part number: 883710A01
GTIN: 745061577107
Pickup or normally ships: Warehouse transfer - on 2nd-7th business day
Manufacturer: Mercury Marine
$428.83
$403.85
Product Shipping specifications = pounds and inches

883710A01 PANEL MOUNT REMOTE CONTROL-GEN II- LOCK BAR

WARNING: Cancer - www.P65Warnings.ca.gov

This Panel Mount control features a chrome handle and is designed for outboard engines without power trim. All installations require a separate Ignition/Choke assembly and throttle/shift cables to complete the installation. The power trim adapter harness is included to convert 3 pin molex connector to the traditional 3 blade Mercury connector. The neutral safety switch leads are 6.5 ft. (1.98 m) long and have bullet connectors on the ends. The lanyard switch leads also have bullet connectors on the ends.

Used on Outboard engines only ‑ Non Trim versions.

This lock bar control can be mounted on port or starboard side and have full 360 degree orientation ‑ every 30 degrees.

This control uses GEN II throttle/shift cables. View all of the Mercury throttle/shift cables here

 

883710A01 PANEL MOUNT REMOTE CONTROL-GEN II- LOCK BAR

WARNING: Cancer - www.P65Warnings.ca.gov

This Panel Mount control features a chrome handle and is designed for outboard engines without power trim. All installations require a separate Ignition/Choke assembly and throttle/shift cables to complete the installation. The power trim adapter harness is included to convert 3 pin molex connector to the traditional 3 blade Mercury connector. The neutral safety switch leads are 6.5 ft. (1.98 m) long and have bullet connectors on the ends. The lanyard switch leads also have bullet connectors on the ends.

Used on Outboard engines only ‑ Non Trim versions.

This lock bar control can be mounted on port or starboard side and have full 360 degree orientation ‑ every 30 degrees.

This control uses GEN II throttle/shift cables. View all of the Mercury throttle/shift cables here

 

*
*
*
*
Categories
Popular tags
View all
Information
Customer service
Copyright © 2024 Bam Marine of Florida Inc. All rights reserved.